Product Information:
Product Code: AD3303
Description:
The
TRIDENT CYM 150 HFT is fitted with a wireless DMX receiver, for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter.
Trident is fitted with a
metal halide CDM-SA/T 150W, 6
000 hours lamp, giving high efficiency but low energy use. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation.
The color mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited color hues, coupled with smooth blends between color changes. The standard optical system gives a relatively narrow soft edge beam of around 38°, with resultant good distance coverage from such a small unit. However, alternative beam angles are also achievable via two options: a horizontal/vertical expansion filter and a wide-angle filter. Color sequences and blends can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system.
LAMP:
150 W, 12.900 lm, 4.200°K
Metal halide lamp CDM-SA/T 150
Average rated life 6.000 hours
G 12 base
Ordering code LP0999
STANDARDS:
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP66 weather protection
Electrical class: I
Shock resistance: 0,8J
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP:
The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 38°. Additional filters are available for alternative beam adjustments.
COLOR CHANGER SYSTEM:
CYM color changer system operated by six high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired color.
BLACK-OUT:
A simulation of black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.
CONTROL:
Internal controller with a choice of eight pre-programmed color change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked - three channels of DMX per projector.
COOLING:
An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
POWER SUPPLY:
230 V, 50 Hz, 0,8 Amp
Call Us TOLL FREE: 
iBienVenidos!